![background image](http://html1.mh-extra.com/html/elsner-elektronik/knx-b8-th/knx-b8-th_installation-and-adjustment_2396602046.webp)
45
Parameter settings
Interface KNX B8-TH
• Version: 24.08.2016 • Technical changes and errors excepted.
5.13.1. AND logic 1-4 and OR logic outputs 1-4
The same setting options are available for AND and OR logic.
Each logic output may transmit one 1 bit or two 8 bit objects. Determine what the out-
put should send if logic = 1 and = 0.
If the
output type is a 1-bit object
, set the output values for the various conditions.
If the
output type is two 8-bit objects
, set the type of object and the output values
for the various conditions.
1. / 2. / 3. / 4. Input
• do not use
- Logic inputs 1...16
- Logic inputs 1...16 inverted
• all switching events that the device
provides
(see chapter
Connection inputs of AND
and/or OR logic
)
Output type
• a 1-bit-object
• two 8-bit objects
Output value
if logic = 1
1 • 0
Output value
if logic = 0
1 • 0
Output value
If block is active
1 • 0
Output value if
monitoring period is exceeded
1 • 0
Object type
• value (0…255)
• Percent (0…100%)
• Angle (0…360°)
• Scene call-up (0…127)
Output value object A
if logic = 1
0 … 255 / 100% / 360° / 127; 1
Output value object B
if logic = 1
0 … 255 / 100% / 360° / 127; 1
Output value object A
if logic = 0
0 … 255 / 100% / 360° / 127; 0
Output value object B
if logic = 0
0 … 255 / 100% / 360° / 127; 0
Output value object A
if block is active
0 … 255 / 100% / 360° / 127; 0
Output value object B
If block is active
0 … 255 / 100% / 360° / 127; 0