elsner elektronik 70119, Installation And Adjustment

Page: 21 / 24

19 Setting of parameters
Brightness sensor KNX L • Status: 20.12.2019 • Technical changes reserved. Errors reserved.
6.2.5. Linkage inputs of AND logic
do not use
Twilight threshold value 1
Twilight threshold value 1 inverted
Twilight threshold value 2
Twilight threshold value 2 inverted
Twilight threshold value 3
Twilight threshold value 3 inverted
Brightness threshold value 1
Brightness threshold value 1 inverted
Brightness threshold value 2
Brightness threshold value 2 inverted
Brightness threshold value 3
Brightness threshold value 3 inverted
Communication object logic input 1
Communication object logic input 1 inverted
Communication object logic input 2
Communication object logic input 2 inverted
Communication object logic inputg 3
Communication object logic input 3 inverted
Communication object logic input 4
Communication object logic input 4 inverted
Communication object logic input 5
Communication object logic input 5 invertiert
Communication object logic input 6
Communication object logic input 6 inverted
Communication object logic input 7
Communication object logic input 7 inverted
Communication object logic input 8
Communication object logic input 8 inverted
6.2.6. OR Logic 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8
All settings of the OR logic correspond to those of the AND logic.
6.2.7. Linkage inputs of OR logic
The linkage inputs of the OR logic correspond with the parameters of the AND logic.
The OR logic is additionally provided with the following inputs:
AND Logic output 1
AND Logic output 1 inverted
1. / 2. / 3. / 4. Input • do not use
• all switching events which the sensor pro-
vides (see “Linkage inputs of the OR logic”)
Logic output sends • one 1 bit object
• two 8 bit objects