10
Maintenance
KNX L brightness sensor
• Status: 20.12.2019 • Technical changes reserved. Errors reserved.
4.
Maintenance
WARNING!
Risk of injury caused by components moved automatically!
The automatic control can start system components and place people in
danger.
•
Always isolate the device from the mains for servicing and cleaning.
The device must regularly be checked for dirt twice a year and cleaned if necessary. In
case of severe dirt, the sensor may not work properly anymore.
ATTENTION
The device can be damaged if water penetrates the housing.
•
Do not clean with high pressure cleaners or steam jets.
Summary of Contents for 70119
Page 1: ...Item number 70119 EN KNX L Brightness Sensor Installation and Adjustment...
Page 2: ......
Page 23: ......
