Menu 10 – Anti-Jam, Electronic Braking and
Gate Movement after Obstruction
Menu No.
Anti-Jam or
Electronic Braking
Factory
Default
Adjustable
10.1
Open Anti-Jam
OFF
0.1 to 2.0 seconds
10.2
Close Anti-Jam
OFF
0.1 to 2.0 seconds
10.3
Electronic Braking
OFF
Off/On
10.4
Gate Movement after Obstruction in
Opening Direction
Stop
Stop / Reverse for 2 sec /
Reverse Fully
10.5
Gate Movement after Obstruction in
Closing Direction
Reverse for 2
seconds
Stop / Reverse for 2 sec /
Reverse Fully
10.6
Exit
10.1 and 10.2 Motor Open and Close Anti-Jam
When the gate are in the fully open or fully closed position this feature applies a reverse voltage for a very
short time. It will prevent the motor from jamming up the gate so it is easy to disengage the motors for
manual operation.
10.3 Electronic Braking
This will stop the motors with an electronic brake. Brake is applied when an obstruction is detected or
when the Stop input is triggered.
10.4 Opening Direction : Gate Movement after Obstruction
After an obstruction has occurred in the opening direction, the gate will either stop, reverse for 2 seconds
or reverse fully.
10.5 Closing Direction : Gate Movement after Obstruction
After an obstruction has occurred in the close direction, the gate will either stop, reverse for 2 seconds or
reverse fully.
25
www.elsema.com
Summary of Contents for Eclipse MCS
Page 31: ...31 www elsema com...
