Instruction Manual
TITANUS BL375T
25
REV 00
EN
6 . 1
M a c h i n e c l e a n i n g
The cleaning of the machine is very important to maintain the full efficiency of the same.
For cleaning the machine can be used dry cloths and compressed air for less accessible areas.
6.1.1
Tank cleaning
The cleaning of the recovery tank is critical to avoid fouling and solids accumulations within it.
Proceed as follows:
1.
turn off the machine;
2.
turn the hooks and remove the warhead;
3.
grasp the tank by the handle and turn it;
4.
remove dirt and dispose of in an appropriate
manner;
5.
wash the tank if necessary.
6.1.2
Filter cleaning
The filter is made of polyester and belongs to the "L" class.Change the
filter regularly and at least 1 once a year. Use only
original spare parts from the manufacturer.
6.1.3
Air filter for engine cooling cleaning
Aspirate (using the machine's vacuum tube) dirt that
accumulates on the side filter positioned on the machine
head, keep clean the filter preserves the functioning of
the engine.
7
T R O U B L E S H O O T I N G
PO
SS
IB
LE
MA
LF
UN
CT
IO
N
S A
N
D R
EME
DIE
S
DEFECTS
CAUSE
REMEDY
The unit does not
start
Lack power
Check the emergency
switch position
Operation stopped
The tank is filled
Check and empty the
recovery tank
The suction power
decreases
suction pipe clogged or
accessories
Check and clean the suction
pipe
The suction power
decreases abruptly
The tank is filled; the suction
tubes are clogged
Check and empty the tank;
check and clean the suction
tubes
Suction block
It intervenes short-circuit
protection; the thermal
protection
Try to turn off and turn on
the machine. If the error
persists contact Support
