3E-490044NI – 03/20
Page 1
EN
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten
PARAMETER ADJUSTMENT
FREQUENCY OF MAINTENANCE AND LEVEL OF USE PER DAY
- Go into the service screen
- Press the “installation parameter” button
- Enter the PIN code for the installer “INSB”
- Validate “V”: when all the code has been entered and it is correct access the menu or start on the PIN number again.
- Enter the number of hours before the next service visit (1500 hours by default): « HSr ». Adjustable from 100 to 5000 hours. Allow at least one
service per year.
* Select the value to be modified
* Adjust the value using the coder
- Enter the average hours per day that the unit is likely to operate: « H-d ». Adjustable from 1 to 24 hours.
* Select the value to be modified
* Adjust the value using the coder
Frequency of maintenance
Level of use per day
WATER TREATMENT CAPACITY
This only functions if there are 2 separate supplies to the oven.
- Go into the service screen
- Select “Client parameters”
- Enter the PIN code “CHEF” Permanent password (upper or lowercase)
- Validate “V”: when all the code has been entered and it is correct access the menu or start on the PIN number again.
- Modify or check the water treatment capacity (in litres). Set to zero by default (if there is not a dedicated water treatment system for the oven).
* Select the value to be modified
* Adjust the setting using the coder
- Reset the counter if required.
* Press « RESET »
* Confirm by pressing « YES »
The water treatment system capacity in litres. Reset. Set
to zero by default (if there is no dedicated water treatment
system for the oven)
