41
User Manual
MN032EN
Effective October 2017
215U-2 802.11
wireless I/O and gateway
EATON
www.eaton.com
Specifications
Specifications for the 215U-2 are provided in the following table.
Table 20. 215U-2 specifications
Item
Specification
Input/Output
Discrete Input
8 Digital I/O (1–4 Configurable as Pulsed Input or Output)
On-State Voltage: < 2.1 Vdc
Wetting Current: 3.3 mA
Max I/P Pulse Rate: DI 1/2: 50 kHz; DI 3/4: 1 kHz
Min I/P Pulse Width: DI 1/2: 10 μsec; PI 3/4: 0.2 msec
Discrete Output
8 Digital I/O (1–4 Configurable as Pulsed Input or Output)
On-State Voltage: DO Max, < 0.5 V
Maximum Current: 200 mA
Max O/P Pulse Rate: PO Max Rate, 1 kHz
Analog Inputs
4 AI (2 Differential, 2 Single Ended)
Current Range: 0–24 mA
Current Resolution: 14 bits
Accuracy (Current): 0.1%
Voltage Input Range: AI 1/2: 0–20 V, AI 3/4: 0–5 V
Voltage Resolution: 14 bits
Accuracy (Voltage): 0.1% full scale
Analog Output
2 AO (Sourcing)
Current Range: 0–24 mA
Current Resolution: 13 bits
Accuracy (Current): 0.1% (20 μA)
Ethernet Ports
Ethernet Port
10/100base
®
; RJ-45 Connector, IEEE 802.3
Link Activity
Link, 100Base via LED
Serial Ports
RS-232 Port
EIA-562 (RJ-45 Connector)
RS-485 Port
2-Pin Terminal Block, Non-isolated
1
Data Rate (Bps)
1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 76800, 115200, 230400 bps
Serial Settings
7/8 Data Bits; Stop/Start/Parity (Configurable)
Protocols and Configuration
Protocols Supported
TCP/IP, UDP, HTTP, FTP, TFTP, Telnet, Modbus RTU Master/Slave, Modbus-TCP Client/Server, WIB I/O
User Configuration
All User Configurable Parameters via HTTP
Configurable Parameters
Unit details, I/O mappings and parameters. For configuration details, see in this manual.
Modbus TCP/ RTU Gateway
Embedded Modbus Master/Slave for I/O Transfer
Security
Data Encryption: 802.11 Encryption Standards to WPA-2 with 128-bit AES encryption
LED Indication/Diagnostics
LED Indication
Power/OK; Wireless Link/Activity; RS
-
232; RS
-
485; Digital I/O; Analog I/O Status
Reported Diagnostics
Connectivity Information/Statistics, System Log File
Compliance
EMC
EN 301 489-17
Hazardous Area
UL Class 1, Division 2; ATEX; IECEx Na IIC (ATEX, IEC Ex Pending)
Safety
EN 62368 (RoHS Compliant, UL Listed)
Radio
FCC Part 90, AS/NZS 4268, EN 300 328
General
Size
5.91" x 7.09" x 1.38" (180 mm x 150 mm x 35 mm)
Housing
IP20 Rated PolyCarbonate
Mounting
DIN Rail
Terminal Blocks
Removable; Max Conductor 12 AWG 0.1 in
2
(2.5 mm
2
)
Temperature Rating
–40 to +160 °F (–40 to +70 °C)
Humidity Rating
0–99% RH Non-condensing
Weight
1.1 lb (0.5 kg)
Power Supply
Nominal Supply
15 to 30 Vdc; Under/Over Voltage Protection
Battery Supply
10.8 to 15 Vdc
Average Current Draw
230 mA @ 12 V (Idle), 150 mA @ 24 V (Idle)
otee:
N
Specifications subject to change.
1
Maximum Distance 4000 ft (1219.2 m).
