30
User Manual
MN032EN
Effective October 2017
215U-2 802.11
wireless I/O and gateway
EATON
www.eaton.com
Figure 39. Date and time
Enable NTP
Select this checkbox to automatically set
the time and date in the device from an
external NTP server. You will also need to
enter the IP address of the NTP server in
the NTP Server IP field.
NTP Server IP
Enter the IP address of the NTP server if
you selected the checkbox to Enable NTP.
YYY/MM/DD HH:MM:SS Use this field to set the time manually if
there is no access to an NTP server. Click
Pick
to display a date and time selection
pop-up. Select the day, month, year
and hour, minute and second, and click
Pick
again to set the time and close the
pop-up. To set the time more precisely,
try selecting a time a little in the future
and waiting until that time to click
Pick
.
Save Changes
and Activate
After configuring settings, click
Save
Changes and Activate
.
For manual time, clicking this button sets
the clock with the new time.
For NTP time, after a short delay the
message next to the NTP Server IP
field updates to show whether the
module successfully connected to the
NTP server. If the message is “Not
Connected,” check that the NTP server
is configured correctly, and use the Ping
command on the Network Diagnostics
page to check that the module can reach
the NTP server. After connecting to the
NTP server, the displayed time changes
to match the NTP server. This is normally
UTC time.
