Elos BIOTOPUS II, Operator'S Manual, Page: 57 / 72

BIOTOPUS II - Operator manual
Page 57
<---> YES
<---> NO
<---> Continue
choose YES and then Continue. You have now installed the additional fl oating switch.
Exit the EXPERT MENU’ and enter the Setup MENU’. Choose “Continue” till the BIOTOPUS
will prompt you:
<---> Rescue
<---> Gsm
<---> Osmo Controller
<---> Continue LEVEL2
choose Osmo Controller and enter the “Set Point” menu to program the duration of the
dosing. This will depend from the type of pump you are going to use.
Don’t forget to assign to this TASK (see table page 70) the appropriate PLUG on one of
your MULTIPLUG (see procedure on page 37).