Elos BIOTOPUS II, Operator'S Manual

Page: 55 / 72

BIOTOPUS II - Operator manual
Page 55
Miscellaneous
PC - LOGGER
To continuosly monitor the STATUS of the parameters of your aquarium on a PC, you
should proceed as below:
• enter the Expert menù pressing one of the four botton for more than 5 sec.
• choose “Continue”
• choose “PC-LOGGER”
<---> Re-set <---> Re-set
<---> Ass. Task to Plug <---> Ass. Task to Plug
<---> PC - LOGGER <---> PC - LOGGER
<---> Exit EXPERT <---> Exit EXPERT
Then select YES
<---> PC-LOGGER : NO <---> PC-LOGGER : NO
<---> Yes <---> Yes
<---> No <---> No
<---> Continue <---> Continue
You can now connect your PC, using a NULL MODEM adapter/cable, via the serial port,
to the BIOTOPUS and through an Hyper Terminal Session (baud=2400, bit=8, odd=none,
stop bit=1, fl ow control=none), you’ll obtain on the display the IN-TIME data.