Elos BIOTOPUS II, Operator'S Manual

Page: 32 / 72

BIOTOPUS II - Operator manual
Page 32
Advanced Setup
MANUAL SETUP -
I WANT TO CHANGE THE SET POINTS:
If you decide that the Biotope pre-sets are not suitable to your need, you can change
one or all the SetPoints and all the related parameter to fi t your needs. You can do this
performing the following steps:
press for fi ve seconds (see page 13-SAFETY LOCK) one of the four keys on your display
module. You’ll be taken to the “FIRST LEVEL MENU’”.
Press the fi rst button from the Top “
Setup
” to enter the “Setup Menu”:
<---> Setup
<---> Manual on/off
<---> History Min/Max
<---> EXIT
and then choose the parameter you want to modify. Let assume you want to set-up a
different pH
, the computer will prompt you:
<---> Clock
<---> Lights
<---> Temperature
<--->
Continue
press “ Continue ” till on the display you can see the word pH 1, then press “ pH 1 ” and
again the fi rst button from the top “ Set points ”. The computer will show you, on the Top-
right part of the Display the Mode you have chosen (in this case “Biotope”)