web
surfer - User Manual
How to connect an external monitor:
1. Turn off your computer and make sure the monitor power switch is
turned off. You may damage you laptop or monitor by connecting these devices
while the laptop is turned on.
2. Connect the monitor cable to the DVI port at the left of your UMPC (if your
monitor takes VGA then use a DVI to VGA adapter).
3. Connect the monitor power cable and plug it into a properly earthed wall
outlet.
4. Turn on the monitor.
5. Turn on your websurfer. Both the LCD panel and the monitor screen will
show the display. Your computer is set as default to run in simultaneous
display mode.
6. If you only want to show the display on the external monitor and shut off
the LCD display, you can use the <Fn> + <F3> hot-key to switch the display type
between LCD and external monitor. Keep pressing the hotkey until you get the
display to external monitor only.
