User Manual: Elo
®
PayPoint for Windows
UM600039 Rev B, Page 18 of 33
Power
Press the register power button to turn the Elo PayPoint for Windows Register on. Press the
start menu and select shut down to power off the Elo PayPoint for Windows register.
In the event that the register freezes and does not respond, press and hold the power button
until the register turns off. If the register does not turn off via the power button, the register will
need to be powered down by unplugging the power cord from the wall.
The Elo PayPoint for Windows Register power button is equipped with an LED that indicates
the power status of the register, as follows:
Register Power Status
LED Status
OFF (disconnected from wall)
Off
OFF (connected to wall)
Red
SLEEP
Red
ON
Solid white light
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications available on the Elo website
www.elotouch.com.
To bring register out of sleep/standby mode, touch the screen or press the power button once.
If long periods of non-use are planned, turn off the Elo PayPoint for Windows Register to save
power.
The maximum voltage, frequency and current for the register, are provided in the power ratings
table below:
Operating Voltage
Range
Operating
Frequency Range
Operating Current
Range
Elo PayPoint for
Windows Register
100 - 240Vac
50 – 60 Hz
0.1 – 0.3 Aac
