30
Attaching and Removing Presser Feet
Press the “Up/Down Needle” key until the needle
is in the raised position.
Turn OFF the power switch. Raise the presser foot
and press the red button
q
on back of the shank.
The presser foot will drop off.
Place the selected presser foot so the pin
e
on
the foot lies just under the groove
w
of the shank.
Lower the presser bar and attach the foot.
Attaching and Removing Shank
Turn OFF the power switch. Raise the presser
bar.
Turn the thumbscrew
q
counterclockwise with the
screwdriver to remove the shank.
To attach, loosen the thumbscrew
q
counterclockwise
with the screwdriver. Attach the presser foot
w
to the
presser bar
e
. Tighten the thumbscrew by turning it
clockwise.
q
w
e
q
w
e