38
elna 9900
Replacing the Static Cutter Blade
Setscrews
Static cutter blade
Setscrews
1. Remove the setscrews and needle plate.
2. Press
Divide
key to move the dynamic cutter blade
forward.
3. Remove the two setscrews and replace the static
cutter blade.
4. Attach the static cutter blade and tighten the set
screws while pressing the static cutter blade in the
direction of the arrow.
NOTE:
If the dynamic cutter blade interferes with the left corner
of the static cutter blade when moving the dynamic cutter
blade, shift the static cutter blade to the right.
5. Adjust the cutter blades position (see following pages
39 and 40) and test auto thread cutting.
6. Attach the needle plate.
Summary of Contents for 9900 - LEAFLET
Page 1: ...SERVICE MANUAL 9900 ...