manualshive.com logo in svg

ELNA 9900 - LEAFLET, Service Manual

The ELNA 9900 - LEAFLET is a high-quality sewing machine with advanced features and superior performance. To make the most of its capabilities, a comprehensive manual is a must-have. You can download the manual for free from manualshive.com, ensuring that you have all the information you need to unleash your creativity.

Share
Download
background image

elna 9900

24

Adjusting the Needle Drop Position (Back or Forth)

1. Set the moving head to needle bar No. 3 (see

pages 26 and 39 of the instruction book).

Push the needle bar No. 3 down to engage the

needle bar clutch.

2. Turn the handwheel until the needle goes down

into the needle hole.

Loosen the 2 setscrews. Adjust the needle drop

position adjusting plate. Center the needle drop

position in the needle hole.

3. Adjust the hook timing (see page 34).

Setscrews

Needle drop position adjusting plate

Needle

Needle hole

Summary of Contents for 9900 - LEAFLET


























































Reviews:

No comments

Related manuals for 9900 - LEAFLET

R.P.S. Corporation GTX Series Operator'S Manual preview
GTX Series
Brand: R.P.S. Corporation Pages: 48
GBC GBC Proclick Pronto User Manual preview
GBC Proclick Pronto
Brand: GBC Pages: 16
GBC CombBind C340 Instruction Manual preview
CombBind C340
Brand: GBC Pages: 74
GBC CC2700 Operating Instructions Manual preview
CC2700
Brand: GBC Pages: 28
Oki OF5700 Guía De Referencia Rápida preview
OF5700
Brand: Oki Pages: 16
Qtx STRATUS-1200 User Manual preview
STRATUS-1200
Brand: Qtx Pages: 5
Olivetti OFX 550 Instructions Manual preview
OFX 550
Brand: Olivetti Pages: 83
Singer 149-4 Parts List preview
149-4
Brand: Singer Pages: 3
Ibiza 15-1110 User Manual preview
15-1110
Brand: Ibiza Pages: 16
Truvox HM 10 User Instructions preview
HM 10
Brand: Truvox Pages: 12
U.S. Products ADVANTAGE-400H Series Information & Operating Instructions preview
ADVANTAGE-400H Series
Brand: U.S. Products Pages: 8
Cognex In-Sight 8000 Series Manual preview
In-Sight 8000 Series
Brand: Cognex Pages: 116
HAKO Citymaster 1250 Maintenance Manual preview
Citymaster 1250
Brand: HAKO Pages: 40
Neolt Neofold HS 1250 User Manual preview
Neofold HS 1250
Brand: Neolt Pages: 114
Olivetti d-Copia 5002MF Operation Manual preview
d-Copia 5002MF
Brand: Olivetti Pages: 269
Oki OKIFAX 2350 User Manual preview
OKIFAX 2350
Brand: Oki Pages: 87
Tivax LSS 339 Instrucion Manual preview
LSS 339
Brand: Tivax Pages: 6
SWF MAN-12 User Manual preview
MAN-12
Brand: SWF Pages: 74

Brands by name

Popular brands

Load more brands