PDFMAILER.DE
FEED STEPPING MOTOR
34
To remove:
1.
Remove the front cover (see page
11
).
2.
Remove the receptacle unit (see page
27
).
3.
Pull out the feed stepping motor connector from the A-circuit board.
4. Remove the snap ring
B
and the 2 screws
A
.
5.
Remove the feed stepping motor
C
together with feed rod
D
.
To attach:
1.
Slide the feed rod
D
onto the feed arm pin
F
.
2.
Then attach the feed stepping motor by tightening the 2 screws
A
, tighten the 2 screws at
the spot that where the feed arm moves smoothly.
3.
Attach the snap ring
B
.
4.
Attach the receptacle and the front cover.
5.
Adjust the Stretch stitch feed balance (see page
20
).