PDFMAILER.DE
FEED DOG HEIGHT
18
The highest position of the feed dog should be between 0.80 and 0.90 mm from the surface of
the needle plate when the pressure dial is set at 3 and the presser foot is lowered.
1. Set the pressure dial at 3 and lower the presser foot.
2.
Turn on the power switch.
3.
Remove the bed cover (see page
10
).
4.
Turn the balance wheel toward you to set the feed dog at the highest position.
5.
Loosen the screw
A
and the nut
B
.
6.
Adjust the feed dog height by turning the adjusting screw
C
.
7.
Tighten the nut
B
and the screw
A
.