PDFMAILER.DE
THREADER PLATE
24
When the hook of the threader plate is damaged, change or adjust the part as follows.
To change the threader plate:
1.
Raise the needle to its highest position and lower the threader knob
A
to its lowest position.
2.
Loosen the screw
B
and remove the threader plate (Fig.
A
).
To change the needle threader:
1.
If the hook of the threader plate
F
touches left or right side, loosen the screw
D
and adjust
the hook position (Fig.
B
).
2.
If the hook of the threader plat
F
touches the top or bottom side of the needle hole, loosen
the screw
E
and adjust the hook position (Fig.
C
).