PDFMAILER.DE
DC MOTOR
30
To remove:
1.
Remove the front cover (see page 1
1
).
Move the front cover so that you can pull out the driving motor connector.
2.
Remove the receptacle (See page
27
).
3.
Remove the belt.
4.
Removes screw
A
and remove cord guide
B
.
5.
Pull out the motor connector from the A-board.
6.
Remove screws
C
and
D
.
7.
Take out the motor.
To attach:
1.
Set the motor in machine and replace screws
C
and
D
.
2.
Snap the motor connector into the a-board.
3.
Attach cord guide
B
using screw
A
.
4.
Replace the motor belt.
5.
Move the motor mounting bracket
E
by applying approximately 300 g pressure in
the middle of the belt, it should deflect 7 to 9 mm when set properly.
6.
Tighten screw
C
and
D
.
7.
Replace the front cover.
