Elmo T-200 Instruction Manual Download

Page: 63 / 78

Do not look into the lens during the projection. The strong light emitted

from the lens may cause damage to your eyes.

The lens surface is easily damaged. Do not rub the lens with a hard

material or hit it.

4 MAINTENANCE

This section describes the simple maintenance procedures you should follow to clean
the lens, the cabinet and the remote control.

CLEANING THE LENS, THE CABINET AND THE

REMOTE CONTROL

Cleaning the lens

1. Before starting the cleaning, turn off the projector, disconnect the power cord and

then allow the cabinet to cool.

2. Wipe the lens with commercial lens-cleaning paper.

Cleaning the cabinet and the remote control

1. Before starting the cleaning, turn off the projector, disconnect the power cord and

then allow the cabinet to cool.

2. Gently wipe the cabinet with a soft cloth like gauze. If the cabinet is particularly

dirty, soak the soft cloth in water with a small amount of neutral detergent in it,
squeeze the cloth very well, and then wipe the cabinet. After cleaning, gently
wipe the cabinet with a dry cloth.

Wipe the dirt off the remote control with a dry soft cloth.

Lens

Summary of Contents for T-200















































































Search results

Summary of Contents for T-200

Reviews:

Related manuals for T-200

Brands by name

Popular brands

Elmo T-200, Instruction Manual

Search results

Summary of Contents for T-200

Reviews:

Related manuals for T-200

Brands by name

Popular brands