Elmo T-200, Instruction Manual

Page: 14 / 78

LED BACKLIGHT INDICATION
There is an LED indicator behind each button on the control panel (7pcs in total) and
the warning indicator. These LEDs will light up according to the status of the projector.
LED Backlight Blue
There is a blue LED indicator behind each button on the control panel (7pcs in total).
These LEDs will light up when the power is on.
The brightness of the LED has three levels which can be set from the menu. You can
also set the LED to always ON.
Unless it is set to OFF from the menu, the LED will light up at the brightest level while
the menu is displayed.
The power button LED also works as a start indicator.
The LED will flash at its brightest level at 2 seconds intervals (light on for 1 second
and light off for 1 second) until the start-up is complete and the power is on.
LED Backlight Red
There is a red LED indicator behind the power button on the control panel, which will
light up dimly when the power is off.
The LED will flash at 0.5 seconds intervals (light on for 0.25 seconds and light off for
0.25 seconds) when the projector is in "abnormal temperature (warning)" status and
flash in 2 seconds intervals (light on for 1 second and light off for 1 second) when the
projector is in "abnormal temperature (stop)" status.
When the temperature of the projector becomes too high, while the power is off, the
red LED will light dimly and will flash.
Warning indicator(
)
The LED will flash at 0.5 seconds intervals (light on for 0.25 seconds and light off for
0.25 seconds) when there is something wrong with the fan and flash at 2 seconds
intervals (light on for 1 second and light off for 1 second) when the brightness level of
the LED decreases.
Warning indicator(red)
LED Backlight Blue
cs
Power indicator
This LED also turns red.