Elmo L-12F Instruction Manual Download Page 75

Page: 75 / 81

TROUBLE SHOOTING

Symptom

Possible cause/remedy

The image is

striped.

• This may be interference fringes between dots of printed

matter and TV scanning lines or CMOS pixels. Changing

the shooting range may improve the problem.

• Vertical stripes may appear on an LCD projector image.

Manually adjusting the dot clock at the projector side

may improve the problem.

Images on the SD

card/USB flash drive

are not displayed.

• Remove the SD card/USB flash drive, wait a few seconds

and reinsert.

The image does not

move.

• Camera image is set to [Pause]. Press the Pause button

on the operating panel again to restart.

The remote control

does not work.

• Battery power is low. Replace the coin batteries with new

ones.

• The incorrect remote control is being used. Use the

supplied remote control.

After inserting

the SD card/

USB flash drive,

operations cannot

be performed.

• The SD card/USB flash drive is not being read correctly.

Use the SD card/USB flash drive after formatting it twice

as described below.

First, format the card using a computer. Second, format

the card using the product.

Drawing speed of

the tablet is too

slow.

• Drawing speed may become slow depending on the

resolution setting of the unit. This is not a malfunction.

UVC image is upside

down

• Check that the graphics driver and other device drivers

on your computer are updated. The latest device drivers

are available from the computer manufacturer.

The displayed UVC

image contains

images other than

the camera image

• The software and OS you are using or the connection

status may be causing images other than the camera

image to break through while displaying the camera

image. This problem can be solved by reconnecting the

device or restarting the software.

A software error

message appears

and the UVC image

is not displayed

• If it is taking too much time for the preparation of the

image output, the software may determine this to be an

error. Restart the product, reconnect it to the computer,

and then start the software.

The UVC image/

audio fails to be

output

• Disconnect the USB cable, restart the software, and then

connect the USB cable again.

• If UVC image/audio still fails to be output after restarting,

contact the software vendor and ask if the software you

are using supports MJPEG.

Summary of Contents for L-12F


















































































Search results

Summary of Contents for L-12F

Reviews:

Related manuals for L-12F

Brands by name

Popular brands

Elmo L-12F, Instruction Manual

Search results

Summary of Contents for L-12F

Reviews:

Related manuals for L-12F

Brands by name

Popular brands