27
Function
Command Parameter
Data
Comments
0
DF
Default
Command to reset to the initialized mode.
0
2
0
QS
QR
0 (OFF)
1 (ON)
SA
0 (OFF)
1 (ON)
SC
Status request
Command to inquire the status of the equipment.
ROM version
Command to refer to the ROM version.
Acknowledge
check
Command to select the command acknowledge for each
operation command. (Default :ON)
Add CR
command
Command to add CR [0Dh] to the end of the acknowledge
data. (Default :OFF)
0 (OFF)
1 (ON)
FZ
0 (OFF)
1 (ON)
LL
Pause
Command to pause the image.
Local lockout
Command to invalidate the switches on the front operation
panel and wireless remote control.
0 (1.0)
1 (0.6)
GM
Gamma
selection
Command to switch the gamma setting value of the image.
0 (OFF)
1 (ON)
AP
Aparture
selection
Command to switch the sharpness (edge effect) of the image.
Note:
"
" in the data column means that SPACE [20H] should be transmitted twice.
