8
Name
Function
Reference Page
16.
RGB-out Terminal
To output the image when connected to RGB input P.12, P.14
[RGB OUT]
equipment, such as LCD projector and multi-sync
monitor.
17.
RGB-in Terminal
To output the image from RGB-out Terminal
P.14
[RGB IN]
[RGB OUT]
when RGB1 is selected for input.
18.
USB Terminal
[USB]
To connect a USB cable.
P.20
When the supplied USB cable is connected here, the
image can be captured or the Presenter can be controlled
on the supplied CD-ROM "Image Mate for HV-400XG/
3000XG/3500XG."
19.
Video-out Terminal
To connect to a monitor or other output equipment.
P.12
[VIDEO OUT]
20.
In/Out Selector Switch
To select In/Out as follows: P.10, P12
[A]
key
To select the image output from RGB-out terminal
[RGB OUT]
.
XGA output
TV output
Note:
When "TV output" is selected, only the
presenter image can be seen on TV
monitor. (not picture from
[RGB IN]
.)
[B]
key
To select the TV output system.
NTSC
PAL
[C]
key
To select the shutter frequency.
In the area where the power frequency for the shutter
is 50Hz, the screen may flicker due to AC discharge
lamp, such as fluorescent lamp and mercury lamp.
This flicker may be reduced by setting the switch to
50Hz.
60Hz
50Hz
[D]
key
To select the RS-232C.
Use of the mouse
Control of the Presenter
Key arrangement and their functions
0
1
A
XGA
TV
B
NTSC
PAL
C
60Hz
50Hz
D
Mouse
Control
