15
Part Names
000000
000000
Power LED
Indicates the battery charge status.
The LED lights up when the clicker is turned on
and begins flashing when the battery level is low.
See
〈
About LED
〉
.
Power button
Turns ON / OFF the clicker.
Press this button for 3 seconds or longer to turn
OFF the clicker. See
〈
Starting SRS
〉
.
Response button
（
1
～
6,T/F
）
Students can respond to questions using 1(A)
～
6(F) and T(Y)/F(N) buttons.
The last pressed button lights up or
flashes for 5seconds. See
〈
About LED
〉
.
Student number ( Clicker number )
By default, a sticker with a number from 1-24
( or 32/40) is attached.
Caution
The supplied clicker number
sticker can be attached.
Wireless setting button
Use this button when configuring the wireless
connection setting with the wireless adapter.
Open the battery box cover when performing
the configuration.
See
〈
Wireless setting for the clicker
〉
.
Back
Battery box cover fixing screw
Use the supplied screw driver to tighten the
fixing screw.
Front
Battery box
Insert the alkaline dry cell AAA batteries.
See
〈
Replacing the batteries of the clicker
〉
.
Device ID
ID number of the clicker.
■
Clicker
Strap hole
For attachment of a commercially available strap.
Battery box cover
Use the fixing screw to open/close the cover.
Caution
Be careful not to lose it.
Only open when absolutely
necessary.
