17
Caution
Preparation
Remove an insulation sheet from the clicker
An insulation sheet is inserted before shipping to avoid the battery exhaustion.
Remove the sheet before use for the first time
by following the below steps:
Remove the battery box cover on the back
of the clicker together with the fixing tape.
↓
Remove the insulation sheet while
pressing the batteries.
In case it is difficult to remove the cover with the tape, use the supplied screw driver to loosen
the battery box cover fixing screw.
Dispose of the tape and the insulation sheet after removal.
Make sure to attach the cover after removing the insulation sheet and tighten the fixing screw.
・
Be careful when replacing the battery because it may pop out.
・
The supplied dry cell battery is for an initial operation check. Its operating life
is not guaranteed.
Insulation
sheet
