Strona 9 z 11
rev. 1.0.1
USER MANUAL
:
G
T100
GPS MOTORCYCLE TRACKER
www.elmic.pl
,
11.
Reboot device
When there is something wrong with the link of GPRS, e.g., The parameter setting of the device is correct, but you can't
track the car on the platform. At this moment you can send a command to the device to reboot the device.
The format is:
RESET#
After receiving this command, the device will reboot after 1mins.
Operation of device
1.
Check location
1. Via SMS
1.1 SMS “
WHERE#
”, to the SIM number of device. The device will send a location message automatically. You can get the
coordinates. If the device does not search any information of location, it will send “No data” to the cell phone.
Example:
Lat:N22.571285,Lon:E113.877115,Course:42.20,Speed:0.0740,DateTime:10-11-23 22:28:51
1.2 SMS “URL#”, to the SIM number of device. The device will send a location Google Map link. If the device does not
search any information of location, it will send “No data” to the cell phone.
Example:
<Date Time
：
10-11-23 23:42:51> http://maps.google.com /maps?q=N22.571490,E113.877103
2. Via platform
Go to the platform website offered by dealers to check your vehicle location.
2.
Wire cut-off alarm (on as default)
When the electricity supply of device is cut off, it will activate cut-off alarm. In this case, the device will send related SMS
to the specific numbers and dial the numbers in circles. If nobody answers, the call just keeps 3 loops at most. At the
meantime, the device will upload SOS alarm data to the server. And it will send:
Cut Power
！
<Date Time:11-06-17 14
：
53
：
06>
，
http://maps.google.com/maps?q=N22576713,E113.916585
Send SMS command:
POWERALM,OFF#
to turn it off.
Note: The specific numbers should be preset
3.
Low battery alarm (on as default)
When the device is only working with battery, once the internal voltage of battery is less than 3.7V, device will send low
battery alarm sms to specific number and alarm on platform.
Low battery alarm sms content example:
“Attention!!!battery too low, please charge.”
Which means the battery is to
low, to inform user charging it in time.
Send SMS command:
BATALM,OFF#
to turn off the alarm.
Note: The specific numbers should be preset
4.
Vibration alarm
When the vehicle is turned off (ACC low) and stays off for 3 minutes (pre-set), the terminal will enter armstatus. During
this time, if the terminal detects 6 times vibrations(default) and the vehicle still stays off (ACC off) in 30 seconds, it will
activate vibration alarm. The terminal will upload longitude and latitude data to the platform. Then the platform will send
the google link to SOS number.
e.g.: “vibration alarm: <DateTime:10-11-23 23:42:51> http://maps. google.com/maps?q=N22.571490,E113.877103”
Note: 1.The SOS numbers should be preset.
2.Send “SENSOR, OFF#” to turn off the vibration alarm.
5.
Moving alarm
Send SMS command:
MOVING,ON,R#
(100≤R≤1000 meters, 300 is recommended)
In the situation where ACC becomes low, if the vehicle is moved over 300 meters (pre-set) from the latest location, the
terminal will send moving alarm to the platform. SOS number will receive moving alarm message.
e.g. “Attention! The vehicle is moved. <DateTime:10-11-
2323:42:51>http://maps.google.com/maps?q=N22.571490,E113.877103”
Send SMS command:
MOVING,OFF#
to turn off the alarm
