Strona 5 z 11
rev. 1.0.1
USER MANUAL
:
G
T100
GPS MOTORCYCLE TRACKER
www.elmic.pl
,
5.
LED Indicators Status:
GPS LED Indicator – Blue
Status
Implication
Quick Flashing
Searching GPS signal
Slow Flashing
GPS fix
OFF
No GPS fix or initializing
GSM LED Indicator – Green
Status
Implication
Quick flashing (interval 0.1s)
GSM initializing
Slow flashing (flash 0.1s every 2s)
Connected to GSM Network
OFF
No GSM Signal or no SIM Card installed
Power Status – Red
Status
Implication
Flashing (interval 0.1s)
Low battery
Slow flashing (interval 0.2s)
Full charge
Solid Red
Charging
OFF
Low battery/Power off / troubleshot
Notice: Ignition detection indication: three LED indicators take turns flashing.
Getting Start
Please follow below instructions for ensuring safe and correct use.
1.
Install the SIM card
Place the SIM card into the device with the gold-colored side facing down.
Note: Make sure there is enough credit on the SIM card. If you will be using the GPRS function, you should pay
attention to the current SIM card GPRS charge.
2.
Install the device
You need to choose somewhere that it won't be found, because the whole point of fitting covert GPS motorcycle tracker is
the secrecy element. Installation please refers to below picture.
•
Under the back seat
•
Inside the front cover
•
Inside the tailing cover or plastic component
NOTE: 1. If the windshield is pasted with metal thermal-
protective coating, it may affect the performance of the device.
In this case, please change the installation place after
consulting the professional.
2. Any high power devices such as reversing radar, anti-theft
device or communication equipment would affect the signal of
the device.
3. All metallic cases of the windshield will attenuate the signal
on the tracking device. It’s simply due to the shielding effects of
the metal compound of the case.
