Strona 3 z 11
rev. 1.0.1
USER MANUAL
:
G
T100
GPS MOTORCYCLE TRACKER
www.elmic.pl
,
Introduction
Thank you for choosing this GPS Motorcycle Tracker. Please read this Manual carefully to fully understand its usage,
perfect functions and simple operation. This product not only provides tracking function but also provides cutting petrol or
electricity of your car to meet your requirements of monitoring comprehensively car security. The Company reserves the
right to modify this Manual from time to time without prior notice. Before using this product, please read these Attentions
carefully to ensure safe and proper operation of this product.
Safety Warning & Attentions
1.
Attention
•
Do not place this product on an uneven or unstable table-board to prevent failure or damage caused by falling.
•
Only the battery designated by the Company can be used on this product. Application of other products may lead to
leakage, overheating, blowout and fire of the battery.
•
Do not crash, vibrate, or throw device in order to avoid failure and fire.
•
Do not use this product in a place with flammable and explosive gas; otherwise, product failure and fire may be
caused.
•
Do not place this product in a place with high temperature, high humidity or large amount of dust; otherwise,
product failure may be caused.
2.
Attention for operation of this product
•
Do not dismantle or remodel this product, otherwise, damage, creepage and electrical fault may be caused to this
product.
•
Place tiny metal objects such as drawing pin at a place far away from the speaker. As the speaker has magnetic
property while working, it will attract these tiny metal objects, which may lead to personal injuries or damage of the
speaker.
3.
Operation and maintenance
•
Please keep this product dry, as rainwater, moisture, humidity and liquids or moisture content may contain mineral
matters that erode the circuit.
•
Do not keep this product in any place with high temperature. As high temperature may shorten the lifespan
of electronic device, damage the battery and cause deformation or melting of certain plastic parts and components.
•
Do not keep this product in any place with low temperature. As when being moved from a place with low
temperature to a place with normal temperature, it may generate humidity inside, which may cause damage of circuit
board.
•
Do not attempt to dismantle this product. As improper handling by nonprofessional personnel may cause damage of
the device.
•
Do not toss, knock or shake this product, as tough operation mode may damage the motherboard inside the device.
•
If this product is made wet by mistake, shut it down, remove the battery, and restart the product after confirming
it complete dry after 24 hours.
•
Use clean and dry soft cloth to clean the lens, infrared lamp and light sensor.
Warning: improper operation will void warranty!
Product Overview - Model:
GT100
1.
Accessories:
Device
Power cord
Relay
User Manual
Please make sure that all accessories are complete. Pictures are for indication and illustration purposes only.
GPS Motorcycle tracker
