Strona 10 z 11
rev. 1.0.1
USER MANUAL
:
G
T100
GPS MOTORCYCLE TRACKER
www.elmic.pl
,
6.
Oil cut-off
1. Via platform
Send oil cut-off command on platform. To make sure the security of vehicle, tracker can only indicate to cut off oil when
GPS is in valid position status, and the speed is less than 20KM/H or in static. Platform account password is needed when
sending oil cut off command.
2. Via SMS
Firstly, you should set a center number. Only center number can send the command to the device to cut off and restore
oil.
The format is:
RELAY,1#
After the command is carried out, it will reply “Cut off the fuel supply: Success! Speed:0 Km/h”. If the command didn't
carry out, it will reply the reason about fail to carry out.
Note: To ensure the safety of the driver and the car, this command is valid only under two conditions: the GPS is
located; the speed is less than 20km/h
7.
Restoring Oil
1. Via platform
When the alarm is off, sending recover oil commands manually. Device will restore oil supplying, and vehicle will work
normally again.
Platform account password is needed when sending oil cut off command.
2. Via SMS
Only center number can send the command to the device to restore oil.
The format is:
RELAY,0#
After the command is carried out, it will receive “Restore fuel supply:Success!”
Web based tracking online activation
The GPRS web based tracking platform allows real time tracking with the latest Google maps. There is also a playback
feature that allows you to view where the vehicle has been for up to 30 days in the past making it ideal for fleet
management.
