Product description
© Elma GmbH & Co KG
BA/ Transsonic TI-H_GB_0306
9
4.8
Description transducer tank
The transducer tank is made of a special highly cavitation-proof
stainless steel, double welded at the edges (both on the inside
and on the outside).
In addition to the drain opening there are other openings in the
transducer tank (TI-H 25 – TI-H 160) that can be used for
•
bottom scouring (drain) and supply to the circulating system
of the cleaning liquid, e.g. through a pump filter unit,
•
for the installation of a cooling device in the cleaning liquid.
On the standard unit these openings are closed by screwed
caps.
The ultrasonic transducers are fitted under the transducer tank,
the heating is fitted to the side wall.
Illustration 4.8 View tank TI-H 25
Overflow (TI-H 25 – TI-H 160)
Level switch (TI-H 25 – TI-H 160)
Filling level marking for minimum level
Heating element inside the tank (TI-H 25 – TI-H 160)
Drain opening
E
D
B
A
C
A
B
C
D
E
