Product description
12
BA/ Transsonic TI-H_GB_0306
© Elma GmbH & Co KG
4.10
Description operating elements
Illustration
4.10.1 Operating panel multi-frequency unit
Turning knob
„ultrasonic time“
for the preselection of the
period of ultrasonic operation.
Available settings: 1-15 min for short period operation
permanent operation
∞
(switch-off by hand required)
Turning knob
„function“
for the selection of the ultrasonic
mode
(available on multi-frequency units only)
Sweep – continuous shifting of the sound pressure maxima,
allowing more homogeneous distribution of the sound field in
the liquid.
Degas – for degassing of fresh mixed cleaning liquids (single
half wave operation).
Normal – standard operation; the transducer system is operated
in double half wave mode.
Pilot lamp heating
Indicates operation of the heating system.
Turing knob
„temperature“
for the preselection of the
required temperature of the liquid. Stepless regulation of the
temperature preselection for the heating of the cleaning liquid.
Turning knob
„power“
for the stepless setting of the required
ultrasonic power: setting range 10 – 100 %.
Turning knob
„frequency“
for the setting of the required
ultrasonic frequency (on multi-frequency units only)
Preselection of the required cleaning frequency (25 / 45 kHz or
35 / 130 kHz). This switch cannot be found on single frequency
units (SF 35 kHz).
Switch „
heating
“
(on / off) for switching the heating on and off.
Plastic cover class IP65 to protect against entering moisture.
B
C
D
A
E
F
G
A
B
C
D
E
F
G
