Ultrasonic cleaning process
© Elma GmbH & Co KG
BA/ Transsonic TI-H_GB_0306
19
7
Ultrasonic cleaning process
Please observe the following instructions before starting the
ultrasonic cleaning process.
Risk of scalding by hot surfaces and cleaning liquid!
Ultrasonic energy is physically transformed into heat.
The unit and the liquid in the tank heat up during ultrasonic
operation even with the heating switched off.
During permanent operation with cover temperatures exceeding
60°C can be reached.
During permanent operation with cover and heating
temperatures exceeding 80°C can be reached.
Do not reach inside the bath.
Wear protective gloves when touching unit and basket!
CAUTION
Ultrasonic units can produce annoying sounds.
Wear personal ear protection devices when working close to an
ultrasonic unit which is operated without cover.
NOTE
Ultrasonic energy is physically transformed into heat.
The unit and the cleaning liquid in the tank heat up during
ultrasonic operation even with the heating switched off. During
permanent operation with cover temperatures exceeding 60°C
can be reached.
For the cleaning of temperature-sensitive items please take the
heating up of the cleaning liquid into consideration.
NOTE
Sensitive surfaces can be damaged when exposed to
ultrasound over prolonged periods.
Ensure that sensitive surfaces are exposed to ultrasonic activity
for a suitable period only.
If in doubt check the cleaning progress regularly and observe
the state of the surface material.
NOTE
The operator is responsible for the inspection of the
cleaning result and the regular checking for possible
damages on the cleaning items during the cleaning
process.
