24
User MP500/xx
4.7
ENABLE/DISABLE OUTPUTS
By this screen you can enable or disable the outputs programmed as
“Commandable”
or
“Pulsed Commandable”.
IMPORTANT!
Output programmed as “Pulsed Commandable” never show “Enabled” status in so far as being pulsed they
toggle for about 2 seconds then th
ey revert to “Disable”.
4.8
NOTES
The screens Arm/disarm system, Exclude/include inputs, Enable/disable Users and Inputs status require the alignment respectively of
Partitions and Areas, Users and Peripheral units/Devices. In presence of the warning icon
a windows with the following message
will be showed:
To access the screen and make changes select the
button which will align data; otherwise the screen can be accessed in
display mode only.
