User MP500/xx
5
1.1.1
Available Actions
In this screen, it is possible to:
. If the control panel had been associated with a Web Server, you can choose whether
to connect to the Control Panel or Web Server to manage their parameters.
connect with the
selected device
.
during the connection phase, cancel the connection in progress.
end the connection in progress.
choose the connection mode the
selected device
.
A window will appears containing the possible modes.
By selecting one, the window closes and the button shows the summary of the connection selected.
For example:
enabled if the device is connected, uploads the configuration.
enabled if the device is connected, downloads the configuration saved in the database of the current screen. The
system status is checked before carrying out the operation and only if the system is completely disarmed, the download will be
completed.
In all the configuration screens, the actions available are:
saves the configuration of the current screen.
prints the configuration of the current screen. In the “Peripheral” screen, prints the configuration of the entire
system.
Note:
the functions
“Load data from control panel”
and “
Download p
rogramming into Control panel”
are not available in the
following screens:
-
Inputs, Outputs Readers and Keypads (it is possible to upload or download the data by selecting the
“BUS Peripheral units”
node
).
-
Inputs, Outputs, Remote Controls and Security (it is possible to upload or download the data by
selecting the “Radio Devices”
node
).
-
Event codes and Input codes (it is possible to upload or download the data by selecting the
C200b
Protocol node)
-
T.P. parameters and T.P. controls (it is possible to upload or download the data by selecting the
Time Programmer
node
).
-
Event log, Arm/disarm system, Exclude/include inputs, Enable/disable Keys, Enable/disable Users and Input status (only data
loading to Control panel is possible).
