User MP500/xx
13
If there are programming differences between the control panel and the software, another window is displayed with a message asking
for the data loading.
This window is always displayed when the warning icons are shown.
When the
button is selected, the Hi
–Connect data will be configured with those of the control panel; the warning icons next
to the menu nodes will disappear enabling the control panel programming.
By selecting
button the configuration will remain misaligned.
2.3
DATA CHANGES
2.3.1
Data changes from Hi-Connect
The data changes from Hi-Connect are reported on the menu with the bold character. Just the nodes and the sub-nodes involved in the
change are showed with the different character.
To confirm the data change in the control panel, press the button
“Download programming into control panel”
. The downloaded data depends on the selection in the menu:
Node “Programming” selected, all the changes are sent to the control panel
Modified node selected, only the changes in the sub-nodes are sent to the control panel
Modified sub-node selected, only the changes in the sub-node are sent to the control panel
If you want to return to the control panel configuration, it is possible to load data. By doing so the performed changes will be lost.
