ELKO - SmartMove Multiwire Dimmer Push
4. To add the device with Install Code, tap
Add Device with Install Code
button
to open the slide-up menu. Select any one of the options (B):
– Scan Install Code - You can scan the device for the Install Code
– Enter Install Code Manually - You can manually enter the install code from
the device
After adding the device with Install code, proceed to
Step 6
.
Add Device
Install Code is Recommended
Add Device with Install Code
To enhance network security, we strongly
recommend using Install Code to add a
device.
If you are unable to scan or type the Install
Code, you can still add the device without it.
Add Device
Install Code is Recommended
Add Device with Install Code
To enhance network security, we strongly
recommend using Install Code to add a
device.
If you are unable to scan or type the Install
Code, you can still add the device without it.
Add Device without Install Code
Scan Install Code
Enter Install Code Manually
Cancel
B
TIP:
It is highly recommended to add the device with Install code.
5. To add the device without Install Code, tap
Add Device without Install
Code
.
6. Short press the push button 3 times (< 0,5 s) on the device.
The LED blinks amber.
7. In the app, select
Confirm LED is blinking amber
and tap
Start
configuration
(C).
Cancel
How to pair device
2
1
x
3
C
The app displays the progress of connecting the device.
3× < 0,5 s
8
DUG_SmartMove MW Dimmer_ELKO-00
Summary of Contents for EKO07253
Page 4: ......
