14
OEM Interface Module Plug Information
Joystick Plug Information
Valve Plug
1
2
Valve Plug
1
2
Joystick Controller and OEM Interface Module –
Using the Joystick Controller template shown in the
Component Mounting Templates section, drill all holes
shown through the panel intended for mounting the
Joystick Controller.
Mount the Joystick Controller using 10-24 x ½” fasteners
secured with blue Loctite 242 or equivalent.
Using the OEM Interface template shown in the
Component Mounting Templates section, drill all 4 of
the 7/32” holes shown.
Mount the OEM Interface Module with four (4) 10-24 x
½” fasteners secured with blue Loctite 242 or
equivalent.
Connect the plug coming from the valve buttons on
the Joystick Controller to the valve plug on the OEM
Interface Module. (See picture to the right)
Connect the plug coming from the Joystick Controller stick to plug 2 on the OEM
Interface Module. (See picture to the right)
If the Joystick/OEM will use CAN communication, connect the green, black, and blue
leads coming from plug 1 to the appropriate CAN line. If the CAN leads will not be
used, replace wires with plugs.
