background image

Elkay Manufacturing Company 

(630) 574-8484 

In-Wall Filtered Water Dispenser 

 

Installation Manual (1000005449 Rev. A)

5.  Connect a 110 VAC power supply to the water 

dispenser. Route the wiring through the wall into the 

bottom of the electrical gang box.

a.  Route the appropriate electrical wiring through a 

wiring clamp into the gang box. 

 

   

NOTICE

Do  not use a cord with a 

three-prong plug to power 

this unit.

b.  Tighten the wiring clamp to prevent the wire from 

being pulled out of the gang box.

c.  Connect black wire to supplied voltage line (black) 

wire and the white wire to neutral.

d.  Use installer provided wire nuts to insulate the 

connections.

e.  If required by code a green grounding screw can be 

used to connect a grounding wire inside the gang 

box.

f.  Reinstall the gang box cover.

Note: If the optional filter box unit is installed under the 

water dispenser, the space behind the filter box is 

limited so make sure any electrical wiring will not 

interfere with mounting the filter box into the wall. 

Refer to "4.3 Critical Depth Dimensions" on page 

6 for additional information.

If using the provided filter box, continue to "4.6 

Installing Filter Box Under Water Dispenser" on page 

8. If installing the filter remotely, advance to "4.7 

Installing a Remote Filter" on page 10. 

4.6  Installing Filter Box Under Water Dispenser

1.  First, replace the front cover of the water dispenser to 

help locate and align the filter box.

NOTICE

Attach the front cover with the 

top two mounting screws to 

prevent it from falling away from the water dispenser 

while the filter unit is being installed.

2.  Place the filter unit into the wall opening and slide it up 

against the bottom of the water dispenser. Make sure 

the filter unit is aligned with the water dispenser. 

3.  Using four #8 flathead screws, start the screws to hold 

the unit in place.  

Note:  Do not completely tighten the screws until the 

filter unit cover is installed and the fit between the 

water dispenser cover and the filter cover is checked.

WWW.RESTROOMDIRECT.COM      704•937•2673     129 Oakpark Dr., Unit A, Mooresville, NC 28115

Summary of Contents for EZH20 LZWSMD*

















Reviews: