(630) 574-8484
13
Elkay Manufacturing Company
Installation Manual (1000005449 Rev. A)
In-Wall Filtered Water Dispenser
NOTICE
For the following steps, it is
recommended to use a heat gun
when manipulating the flexible drain hose. It is
beneficial to conservatively soften the material
before trying to make connections.
6. Attach one end of the 3/4" flexible drain hose to
the 3/4" barbed drain adapter connection using the
supplied hose clamp. The supplied flexible drain is
13" long. If a longer drain hose is required, it must be
installer-supplied.
7. Place the drain basin back into the water dispenser
and reinstall the two screws.
8. If the filter box is used, route the drain hose through
the filter box. Attach the other end to the p-trap drain
adapter using a hose clamp. The drain adapter is
designed to be glued into a 1-1/4" PVC pipe.
Shown with optional
filter box.
9. Install the filter by twisting it into the filter head.
10. Connect the drain adapter into the waste drain pipe.
If the p-trap is located inside a sealed walled, it must
have permanently-glued joints. If the p-trap is in an
accessible location, a standard non-glued p-trap is
acceptable.
Note: Whichever installation method is used: it must
meet local standards and building codes.
11. Install the metal cover. Do not install the drip tray if
the unit is plumbed into the local waste line.
WWW.RESTROOMDIRECT.COM 704•937•2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115
