background image

NOTICE: READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.

NOTE: The information in this manual is subject to change at any time without notice. Installations may 

be performed at different times of construction by different individuals. For this reason, these instructions 

should be left on-site with the facility or maintenance manager.

LIMITED WARRANTY

All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of one year from the 

date of purchase. Decorative finishes warranted for one year. We will replace at no costs goods that prove defective provided we are 

notified in writing of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly 

maintained and used in accordance with instructions. Zurn shall not be responsible for any labor charges or any loss, injury or damages 

whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the 

defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the 

purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantabi

-

lity is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to 

a period of one year and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists are 

approximate and are not guaranteed.

WARNING

: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

ADVERTENCIA: 

Cáncer y daño reproductivo - www.P65Warnings.ca.gov

AVERTISSEMENT: 

Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

Z6900-SD-WM / Z6900-FSD-WM

Z6900-SD-WM / Z6900-FSD-WM

Sensor Operated Battery Powered Liquid or 

Foaming Wall Mounted Soap Dispensers
Installation,

 

Operation,

 

Maintenance,

  

and Parts Manual

Summary of Contents for Z6900-SD-WM









Reviews: