15
1000003740 (Rev. A - 02/2017)
7. Purge the water lines.
1. Place receptacle beneath tap to catch dispensed water. Discard water as necessary.
2. Allow water to run continuously until flow is clear of air.
3. Repeat for all taps.
NOTICE:
The "No/low CO
2
" error LED will flash when dispensing begins. This is correct, as the CO
2
connection has not been activated yet. This alarm can be ignored during this step.
8.
Turn on the boiler
NOTICE:
Never turn on the boiler unless you have filled the machine with water.
NOTICE:
Never turn on the boiler when the inlet water is disconnected.
1. Open the front panel with the supplied key and press the boiler button at the top center of machine.
2. After around 10 minutes, the water reaches the setted temperature.
CAUTION:
Hot water reaches 185°F. Keep children away. Hot, boiling water and steam will scald if
spilled on skin. Do not touch the dispensing nozzle to avoid burns.
Press dispensing
button
DSWH160UVPC
