17
1000003740 (Rev. A - 02/2017)
Operating the Keypad
To dispense your water serving
Hold down the button for that dispenser.
Note:
For safety reason, to dispense hot water you must hold down the upper hot water
button first and then the lower hot water/Energy Saving button at the same time.
To stop dispensing your water serving
Release the button for that dispenser.
To turn on Energy Saving mode
Press and release for less than 4 seconds the Energy Saving button.
Note:
The green LED on the right turns on.
NOTICE:
Energy Saving mode slows down the activation time of the
compression. This mode should only be used when the machine will not be
operated, such as when the business has closed for the day.
To turn off Energy Saving mode
Press the Energy Saving button or any of the dispensing buttons.
Alarms
The blue LED on the left is flashing if an alarm is active:
O
O
Quick flashing - Little or no water at the inlet
O
O
Slow flashing - Little or no CO
2
remaining
To reset an alarm
Turn the machine off, then on again.
NOTICE:
Alarms indicate a problem with the water, CO
2
, or electrical system of the machine. Do not operate
the machine until the problem has been located and fixed.
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING
