Function description
12
No Quantity Name
or
Part
1 1 Hood
2
4
Sheet metal screw ST3,5 x 9,5
3
2
Cylinder head bolt DIN 912 – M8 x 12
4
4
Hexagon head screw DIN 933 – M8 x 25
5 1 Fixing
bracket
6
4
Washer DIN 125 – A 8,4
7
4
Hexagon nut DIN 985 – M8
8 1 Operator
unit
9
1
Driving lever, long version
10 1 Emergency
release
lever
11
1
Bolt 12 x 32
12
4
Washer DIN 125 – A 13
13
2
Eyebolt DIN 94 – 3,2 x 18
14 1 Gate
support
15
1
Bolt 12 x 40
16
1
Push rod, long version
Table 2
7 Function
description
The bending and straightening of the articulated arm effects the opening and closing of the gate. The
end positions are programmed in the learning sequence. During operation the gate opener shuts down
at these end positions and the mandatory mechanical end stops.
For gate wings of 3,000mm length and longer we stipulate the use of an electromagnetic bolt / motor
lock for additional blocking.
The controller MO 36 offers the possibility to activate the gate wings by radio remote control.
The controller is able to observe the max. permitted force which was set before in the learning
sequence. If during the gate movement more force is needed, the gate openers reverse. Additionally
several different safety features, e.g. photoelectric barriers and safety contact profiles, can be
connected. The safety contact profile detection (8,2kOhm) for both directions of motion is integrated in
the controller.
