Mechanical installation
19
61°
61°
2
4
3
1
Drawing 11
Disengage the articulated arm using the emergency release key (see Drawing 11). To do so move the
emergency release key from position 1 to position 2. Then turn the articulated arm into the direction of
position 3, the driving lever divides itself into one upper and one lower half.
Drawing 12
Close the gate completely. Turn the articulated arm towards the gate. Align the articulated arm
horizontally.
The distance between the pivot point of the drive shaft and the pivot point of the gate support has to
be
1035mm
(see also page 15, Drawing 4).