©
09.02.2006 ELKA-Torantriebe GmbH u. Co. Betriebs KG page 9
EST 204, EST 404, EST 804
10.7. Traffic
lights
The controller offers potential free outputs for a green traffic light and a red traffic light (warning light).
The green light is on, when gate is completely open.
The red / warning light is on during movements, during warning times and when gate stops in between.
The red / warning is off, when the gate is completely open or when it is completely closed.
11.
Learn mode MO 56/S
The controller must learn the following parameter during the installation:
- Running time for opening and closing (Gate must be completely open when starting procedure)
- Required force for opening and closing
- If photocell test is needed, how many photocell are connected
In addition you may alter the default values of the following parameter:
- Position for partial opening (BTG)
-
Force
reserve
(step
1-16,
default
8)
- Pause time for automatic closure
(0 to 300 s, default 30 s)
- Warning time prior to closing
(0 to 300 s, default 5 s)
- Radio codes for BT and BTG
(default: BT = -+-+-+-+, BTG = no code)
You may use the learn button (LERN) and the LED’s Diag and SL for programming.
Learn menu
Display: Diag:
⊗
SL-LED:
{
BT
LT
Radio
If timing logic (DIP6=OFF)
learning running time, required force, LS-test
Learn radio code BT
BT
LT
Radio
Learn pause time (confirm end with BT) or
warning time prior to closing (confirm end with LT)
Display: Diag:
~
SL-LED:
{
Learn radio code BTG
BT
LT
Learn position BTG
Display: Diag:
⊗
SL-LED:
⊗
BT
LT
Alter force reserve
Display: Diag:
⊗
SL-LED:
~
Exit learn mode without changes
Controller is in operation mode
Press LT until Diag. lights
BT
LT
Reset to default setting
Display: Diag:
~
SL-LED:
⊗
Delete radio code BT
LT
5s
Delete radio code BTG
LT 5s
Legend: Diag.-LED:
yellow
SL-LED:
red
{
=LED is off
⊗
=LED lights
~
=LED flashes fast
z
=LED flashes in seconds
After each alteration the controller exits to
operation mode.
After altering the DIP switch mode confirm
with the button LERN
