12
Operation
1.
Ensure Battery is Charged
Press either button to check the battery status. If
battery outline blinks red or does not light, charge the
battery prior to use. Lift the blue flap and connect the
USB Charging Cable to the side of Controller and a USB
power supply. The battery light will blink green while
charging and turn solid green when fully charged. The
device cannot be used when the battery is low or while
charging. Remove the USB Charging Cable prior to use.
The fully charged device can deliver at least two
treatment sessions, depending on the selected
intensity level and frequency of use. See Technical
Specifications for information regarding appropriate
use of USB power supplies.
2.
Connect GelPad Cable to GelPad
With Controller turned off, snap the GelPad Cable to the
GelPad.
Snap GelPad Cable
to GelPad
Peel Liner
from GelPad
Constant Green – Fully Charged
Blinking Green – Charging
Blinking Red – Low Battery
