manualshive.com logo in svg

Elitegroup Computer Systems P6VXM2T, Manual

Share
Download
Elitegroup Computer Systems P6VXM2T Manual Download Page 53

 

47 

P2C/C2P Concurrency 

When disabled, the CPU bus is occupied during the entire PCI 
operation period.   

System BIOS Cacheable (Enabled)/ 
Video RAM Cacheable (Enabled) 

These items allow the video and/or system to be cached in 
memory for faster execution. We recommend that you leave 
these items at the default value. 

AGP Aperture Size (64 MB) 

This item defines the size of the aperture if you use an AGP 
graphics adapter. It refers to a section of the PCI memory ad-
dress range used for graphics memory. We recommend that 
you leave this item at the default value. 

AGP-4X Mode (Enabled) 

This item allows you to enable or disable the caching of dis-
play data for the video memory of the processor.  Enabling 
AGP-4X Mode can greatly improve the display speed. If your 
graphics display card does not support this feature, you need 
to disable this item.   

AGP Driving Control (auto) 

This item can be used to signal driving current on AGP cards 
to auto or Manual. Some AGP cards need stronger than nor-
mal driving current in order to operate. We recommend that 
you set this item to Auto by default. 

AGP Driving Value (DA) 

When the previous item AGP Driving Control is set to Manual, 
you can use this item to set the AGP current driving value. 

AGP Fast Write (Disabled) 

This item allows you to enable or disable the caching of dis-
play data for the video memory of the processor. Enabling can 
greatly improve the display speed. If your graphics display 
card does not support this feature, you need to disable this 
item. 

 

 

Summary of Contents for P6VXM2T



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands