manualshive.com logo in svg

Elitegroup Computer Systems P6VXM2T, Manual

Share
Download
Elitegroup Computer Systems P6VXM2T Manual Download Page 37

 

31 

Pin 

Signal Name 

Pin 

Signal Name 

1 
2 
3 

VCC 
Cut away 
IRRX 

4 
5 

GND 
IRTX 
 

SJ1: Single color LED header 

This header allows the user to install an LED indicator to indi-
cate when the computer is in Suspend to RAM (STR) mode or 
normal mode.  

Pin 

Signal Name 

1 
2 
3 

SUSLED-Y 
SUSLED-Y 
PWLED+ 

LSJ1: Single color LED header 

This header allows the user to install an LED indicator to indi-
cate when the computer is in Suspend to RAM (STR) mode or 
normal mode.  

Pin 

Signal Name 

1 
2 

5 VSB 
SUSLED-G 

WOL1/WOM: Wake On LAN/Wake On Modem  

If you have installed a LAN card, use the cable provided with 
the card to plug into the mainboard WOL1 connector. This en-
ables the Wake On LAN (WOL) feature. When your system is 
in a power-saving mode, any LAN signal automatically re-
sumes the system. You must enable this item using the Power 
Management page of the Setup Utility. 

Pin 

Signal Name 

1 
2 
3 

5VSB 
GROUND 
WAKE_UP 

If you have installed a modem, use the cable provided with 
the modem to plug into the mainboard WOM1 connector. This 
enables the Wake On Modem (WOM) feature.  

Summary of Contents for P6VXM2T



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands